September 2018 – Page 2 – Trinity Printing Machinery, Inc.

2007 Ryobi 755+CX – XLW (XLD) LED UV

Another fantastic opportunity from Trinity Printing Machinery for anyone looking for low impression, 6-up LED. With just 38mm impressions, this five-color 6-up press features AMS LED, Harris & Bruno Anilox tower coater and extended delivery. Call or email for more information today!!!
AMS LED UV 23 x 29 inch five-color format Just 38mm impressions!!! XLW image area – 6-up 23 x 29″ U.S. format Dedicated tower coater with extended delivery Harris & Bruno Anilox coating system with chambered doctor blade PCS-G Console for ink and register PDS-E color control scanner Ryobi-matic continuous dampening system Ionization on feeder & delivery CIP4 pre-press link Ryobi Semi-automatic plate change (S-APC) Carton Device max. 0.8 mm Paper presets Refrigeration & recirculation unit Automatic roller wash Automatic blanket wash Automatic impression cylinder wash IR dryer with hot air knives 15,000 sheets/hour Eltosch IR dryer Grafix powder spray […]

2011 Komori GL540+LX

From Trinity Printing Machinery comes the following Komori GL540 with only 50 million impressions! Featuring a dedicated tower coater with extended delivery and prepared for HUV. Call or email for information today!!!
28 x 40 inch five-color format ONLY 50mm IMPRESSIONS!!! Dedicated tower coater with extended delivery Anilox coating system with chambered doctor blade FAPC: full-automatic plate change Auto format setting PQC – print quality control PCD-S II spectrophotometer KHS – Komori Hi-Performance system Komorimatic dampening Ink temperature control Non-stop feeder Automatic roller wash Automatic blanket wash Automatic impression cylinder wash Skeleton transfer units IR dryer with hot-air knives Weko powder spray Prepared for HUV […]

2004 Komori Lithrone 440SP

28 x 40 inch eight-color format 4/4 perfector PQC remote controls PDC SI densitometer KMS IV monitoring system FAPC: full-automatic plate change Komorimatic dampening Technotrans Beta. C refrigeration & recirculation Automatic roller wash Automatic blanket wash Automatic impression cylinder wash Grafix powder spray Approximately 190mm impressions […]

2012 Komori GL540 HUV

From Trinity Printing Machinery comes the following straight, 5-color Komori with UV. Call or email for information today!!!
28 x 40 inch five-color format Full APC QPC PDCS II scanner AMR KHS-AI Komorimatic dampening Technotrans Beta C Ink temperature control UV dryer with 1 lamp Automatic roller wash Automatic blanket wash Automatic impression cylinder wash Powder sprayer UV roller Skeleton transfer cylinders Approximately 106mm impressions […]

2012 Komori LS429+CX (H)

20 x 29 inch four-color format ONLY 19mm impressions!!! Dedicated tower coater with extended delivery Herris & Bruno anilox coating system with chambered doctor blade PQC-S Komori: print quality control PDC-Lite II KMS IV KHS-AI AMR: automatic make ready FAPC: fully-automatic plate change Cocking register Cip3 Automatic roller wash Automatic blanket wash Automatic impression cylinder wash Komorimatic Delta dampening Technotrans Alpha.C Suction tape feeder Ultrasonic double sheet detector Air Side lay and front lay detector Ink temperature control Venturi air guid Baldwin IR dryer Grafix Digitronic 3000 powder spray […]

2008 Komori LS440

The following straight 4-color Komori is available now from Trinity Printing Machinery. Call or email today for more information!
28 x 40 inch four-color format PQC-S console KMS-IV Komorimatic dampening SAPC: semi-automatic plate change Automatic roller wash Automatic blanket wash Non-stop feeder & delivery Toho powder spray […]

1997 Komori L540+CX

28 x 40 inch five-color format Dedicate tower coater with extended delivery Anilox coating system with chambered doctor blade Komorimatic dampening PQC APC AMR Automatic roller wash Automatic blanket wash Automatic impression cylinder wash WEKO powder spray IVT IR dryer UV added in 2012 Approximately 53mm impressions […]

1993 Bobst Autoplaten SP102-CER II

What we have here is a completely cleaned, painted and checked used Bobst SP102-CERII die platten die-cutter. The machine features stripping and blanking and has plenty of spare chases, frames, rails, pins and other spares that will come with the machine. Available immediately just as […]

2011 Polar 115 X Plus

Here is an amazingly clean Polar guillotine cutter we have for sale. This cutter is the 115 X Plus version with an oversized 18.5 inch touch screen for all programming features. The computer has the capacity to store nearly 2000 programs. This particular example has […]

1999 Heidelberg Speedmaster SM74-4P-H

Here is a VERY clean Heidelberg press we have for sale. This used Heidelberg SM74-4PH press is from an in-plant facility and is in immaculate condition. The press has Autoplate, paper presets, all automatic washers and more. This one will go quickly. Call or email […]